answersLogoWhite

0

yes

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Installed a edelbrock 1406 carb on a 400 small block Chevy where do you hook up the transmission kickdown cable?

There are two excellent pdf's for this carb at summitracing.com.


Where would you find a vacuum line routing diagram for a small block 350 with a 600 cfm edelbrock carb on it?

go to google or yahoo and do a search for "vacuum line routing edelbrock"..... it should give you alot of pages. choose the one from edelbrock.


No. both small vac ports are not the same. so where does the Distributor vac line on go on a 351 Cleveland using an edelbrock carb?

With the edelbrock, use the vac line on the carb itself, It will be a small bore, 1/4 ( about ) vacuum line, and should be on the front of the carb.


How do you know which edelbrock carb is on your GM 305 motor?

You will have to look on the carb and get the numbers on it and then go to the Edelbrock website.


How well will a edelbrock torker 2 intake manifold and a 650 cfm edelbrock carb work on a Chevy small block 400 in a 4x4?

The torker 2 is a single-plane design, so it won't work as well as a 2-plane such as a Performer or Performer RPM.


You have a gm 350 crate engine that had 260 hp you put an edelbrock airgap intake and a edelbrock 750 carb with a kn air filter how much horsepower will you have?

274


Where is the carb float located in 1987 Chevy 305 engine?

If you have an edelbrock carb, remove the top of the carb, flip it over and there you have em! 2 floats! should be about 5/16 from the top of the carb i believe


On a small block 305 with a edelbrock preformer intake and an edelbrock 600 cfm carb and headers with hei where should the timing be set how many degrees.?

With the mods you describe I would suggest you start at about 10 to 12 degrees btdc. you may have to play with it to get it just the way you like it. Hope this helps. Mike


How do you set edelbrock carb?

It should be preset from the factory


What is a good carb for low and mid end speed in a 350 small block Price is a major factor too I am thinking about saveing for a small block and wanted to know about all the parts I should get?

There are several choices out there. I've had good luck with the Edelbrock 600 cfm with the electric choke. Price range, $250.


Does a edelbrock carb from a 318 Chrysler fit a 350 Chevy?

Yes. Consult Edelbrock's website for specific details.


Can you install carporator type eldbrock for 305 engine 1986 without changing the top part of engine?

Or from autozone you can buy a quadra-jet to standard adapter plate if you don't have that edelbrock or if you have a holleythe intake manifold is hopefully what youre talking about and the answer is noAnsweryes you can. if you have a stock intake manifold, which uses a quadrajet carb, you can use edelbrock part number #2696 which you can buy from summit racing (www.summitracing.com). it allows you to use an edelbrock performer square bore carb on the stock quadrajet manifold. for that motor i recommend the edelbrock #1406 which you can also get from summit.