I recently replaced pulley on Power Steering pump by taking it to a local garage they have a special puller to remove it and press it back on the new pump cost about 10 dollars
It varies by engine.
On the front of the engine.
pulley puller
bum willy bum
yes water is coming out of this little hole in the water pump
The 1993 Oldsmobile Cutlass Sierra thermostat is located on the front of the engine. You can follow the water supply line from the radiator to the thermostat housing.
A 1990 Cutlass Ciera might hesitate and sputter when the gas pedal is depressed because of water in the fuel or because of damaged or dirty fuel injectors. You might also have an issue with the wiring or the distributor.
On a 1999 Olds Cutlass, the water pump is located in the engine compartment under the hood. It is on the motor on the passenger side of the vehicle.
On the four cylinder it is directly behind the fan pully. on a six cylinder it is behind the timing cover and is timing belt driven.
I Have 94 Probe 4 cylinder that squealed when I started it. the pully on the water pump was lose
the cam position sensor is just below the water pump pulley in the front timing cover. Master
You may want to consider replacing the thermostat.