0
Small Block Chevrolet Torque Specifications Main cap bolts (oil on threads).....................................................70 ft.-lbs. first set wrench for 45 ft.-lbs and tighten each bolt, then set wrench for 70 ft.-lbs and torque each bolt again. Rod bolts (oil on threads)............................................................45 ft.-lbs. Oil pump bolt (oil on threads).......................................................55 ft.-lbs. Head bolts (sealer on threads).....................................................65 ft.-lbs. Screw-in rocker arm studs (oil on threads)....................................50 ft.-lbs. Cam sprocket bolts (oil on threads)..............................................20 ft.-lbs. Intake manifold bolts (sealer on threads except four corner bolts)....35 ft.-lbs. Harmonic balancer (oil on threads)................................................65 ft.-lbs. Flywheel/flexplate bolts (oil on threads).........................................65 ft.-lbs. Pressure plate bolts (oil on threads)..............................................35 ft.-lbs. These specs are for stock-type bolts, if you are using aftermarket bolts you should follow their recommended torque specifications.
What else can I help you with?
What are the torque specs for the intake manifold bolts on a 1997 Chevrolet k1500?
30 ft-lbs
Torque spec 93 4.3 Chevrolet intake manifold bolts?
35 ft. lbs.
What is the torque for intake manifold on a 350 Chevy?
The 350 cubic inch Chevrolet intake manifold bolts have a torque specification of Haiti pounds psi. The bolts should be torqued at 40 pound intervals.
What are the torque specs on intake manifold bolts and exhaust manifold bolts for a 97 Chevrolet Cavalier 2 2 liter engine?
24 ft lbs lower intake 115 inch lbs exhaust
What is the torquing specs for the bolts on a 1999 blazer 43 intake manifold The book gives 132 pounds but this seems too much?
I FOUND THIS AT WWW.AUTOZONE.COM, CLICK ON VEHICLE SPECS . For your 1999 CHEVROLET TRUCK BLAZER 2WD: INTAKE BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE LOWER MANIFOLD BOLTS TO 27 IN/LBS TORQUE LOWER BOLTS TO 9 FT/LBS TORQUE LOWER BOLTS TO 11 FT/LBS TORQUE UPPER MANIFOLD BOLTS TO 44 IN/LBS TORQUE UPPER MANIFOLD BOLTS TO 7 FT/LBS (TO TORQUE BOLTS & NUTS, START IN CENTER USING CRISSCROSS PATTERN)
You would like to know the torque on the intake and heads on a 1986 Chevrolet S-10 Blazer with a 2.8 liter V6 motor?
The heads or 65 ft.lbs Intake bolts 35 ft-lbs
What are the torque specs for head bolts on a 1992 Chevrolet 5.7L?
Cylinder Head bolts 65 ft/lbs=Intake Manifold bolts 30 ft/lbs==Exhaust Manifold bolts 25 ft/lbs=
How many foot pounds of torque used to install bolts on intake of 1972 Chevrolet 350 ci engine?
Intake Manifold (Cast Iron Heads) Non- Hardening Sealer 30 ft-lbs.
Torque specification for 98 Ford F-150?
what is the torque specifications for the intake bolts on a ford 4.2L?
What is the torque specs for the starter bolts on a Chevrolet Suburban?
30 ft /lbs
What is the torque for a 1999 Ford Taurus 3.0 upper intake manifold?
torque for bolts upper intake 1999 ford taurus 3.0 dohc
What are Torque specs for 1994 350 intake manifold?
Intake bolts should be torqued to 35 ft lbs in the appropriate sequence. There should be 12 total "intake" bolts
