7 total 2 in the back 5 front
I have a 1995 400cc Polaris scrambler and I count 15.
The 1998 Polaris Sportsman 500 typically has six grease fittings. These fittings are located on various components, including the front and rear suspension, to ensure proper lubrication and maintenance. It's always a good idea to consult the owner's manual for specific locations and maintenance tips.
There are a total of 5 grease fittings 3 on the rear drive shaft and 2 on the front drive shaft (4x4model)
May need to check your bushing on your suspension and lube your under carriage with grease were there are grease fitting
Polaris - novel - has 370 pages.
There is 11 grease fittings in the front end parts. You have 1 fitting in the front driveshaft, could have 1 in each u-joint. There may be fittings in the rear drive shaft too. There is 11 in the front Suspension for sure, and that is not counting the driveshafts.
400 polaris sportman has 455cc
The polaris is 430 light years from Earth.
The 2009 Chevrolet Suburban typically has grease fittings in various locations, primarily on its chassis components like the front suspension and driveshaft. However, many modern vehicles, including the Suburban, often use sealed components that do not require greasing. As a result, the number of grease fittings can vary, but it's common to find one or two on the driveshaft and possibly a few on the suspension. It's best to consult the vehicle's service manual for specific details.
A 2013 Chevrolet Avalanche typically has several grease fittings, primarily for the chassis and suspension components. The exact number can vary depending on the specific configuration and whether any aftermarket modifications have been made. Generally, you can expect around 6 to 12 grease fittings throughout the vehicle. Always refer to the owner's manual or service guide for precise information on maintenance points.
5
2500 Dealers