answersLogoWhite

0

there are only 6 wires, one to each sparkplug. heres the firing order if you need it. 1-2-3-4-5-6, the coils from left to right facing them are 5-2-3-6-4-1, for the 3.1 v6.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Where is the radiator cap located on a 2000 Oldsmobile Alero?

Where is the radiator cap located on a 2000 Oldsmobile Alero?


How do you fix an engine misfire on a 2000 Oldsmobile Alero?

By checking fuel injector or the spark plug I had the same misfire on my 2001 alero and now it works grrat.


What type of transmission fluid is needed for a 2000 Oldsmobile Alero V6?

A 2000 Oldsmobile Alero V6 requires 6.8 quarts of Dexron III fluid.


What is the fuel mileage on an Oldsmobile alero?

i get about 21 mpg on a 2000 olds alero 3.4L v6


Is 3000 to much for a 2000 Oldsmobile alero?

sounds about right


Is a oil plug for a 2000 Oldsmobile alero reverse threads?

no


Does a 2000 Oldsmobile alero have timing belt or chain?

It has a chain.


Where is the turn signal relay located on a 2000 Oldsmobile alero?

The relay panel on the 2000 Oldsmobile Alero is under the steering column and above the brake pedal. The relay pops out with a screwdriver.


Oldsmobile alero 2000 manual book?

Try eBay, for about $10.


How do you bleed fuel injectors on 2000 Oldsmobile alero?

They are self bleeding.


How much coolant does the 2000 Oldsmobile alero 2.2 engine hold?

A 2000 Oldsmobile Alero with a 2.2 engine will hold approximately 13 liters of coolant. Adding coolant to your vehicle is very important.


Where are the spark plugs on a 2000 Oldsmobile Alero?

In order to gain access to the spark plugs on a 2000 Alero, you must remove the cover on top of the engine that has the engine size. The cover is like a faux valve cover, once you pull it off, you can easily gain access to the spark plugs. You don't need to take off any cover if it's the 3.4 (3400). Look directly behind the radiator and you will see three wires going to the plugs. The other three are located behind the engine in the same location as the front. Just follow the wires and you'll do fine. On a 2000 Alero with a 2.4L, they are located under the cover from the top of the engine. They can be accessed by removing the four bolts on the top cover, then unplugging the wire connector located on the right side.