A Chevy 3.42 rear end typically has 41 teeth on the ring gear and 12 teeth on the pinion gear. This gear ratio of 3.42:1 indicates that for every 3.42 revolutions of the driveshaft, the wheels make one complete revolution. The specific tooth count may vary slightly depending on the rear end design, but these numbers are standard for the 3.42 ratio.
Yes I have one in a1990 silverado short bed with 350 and 5 speed automatic transmition.
If it's the same gear ratio yes they should fit only if its the same lug count must be a six lug ,Tahoe will not have an 8 lug only suburban 2500 will have them must find out youre gear ratio you can do this by counting youre ring and pinion teeth but most 99 Tahoe should have 3.42 gears there is 14 teeth in the pinionn and 41 in the ring forexample divide 14 by 41 and you get 341.463 round it off to 342 i believe six lug suburbans had 3.73 and if youre Tahoe is 4wd you have to go with whatever is in the rear.
342
Yes. A 373 you will lose a couple miles per gallon and run 3,000 RPM at 60 MPH.
342 grams = 12.06 ounces.
342 miles is 550.396 km
To find how many times 76 goes into 342, you can divide 342 by 76. Performing the division, 342 ÷ 76 equals approximately 4.5. This means 76 goes into 342 a total of 4 times, with a remainder.
5 divided by 342 is 0.0146198830409
342 feet = 104.2416 meters
There are 12 inches in one foot. Therefore, 342 inches is equal to 342/12 = 28.5 feet.
342 of them.
8 times with a remainder of 30