I could not find price for removal and install, but the motor is $1699.99.
To change the tensioner you will need to support the oil pan with a floor jack and block of wood, Remove the upper engine mount 15mm nuts (5), then jack engine up a bit Remove the serp belt Remove the upper tensioner bolt. Lower engine down to normal position, remove the r/f wheel Remove the splash guard Remove the lower tensioner bolt. Jack engine back up and remove the tensioner. To install install in the top and LOOSLY put in uppwer bolt Lower engine and install lower bolt Tight then reassemble wheeel etc jack engine tighten upper bolt and fiish reassembly
You must remove the rear package tray.
no not at all not enough room.if it's standered and you need to replace the clutch you have just enough room to remove and install the clutch remember cut the clutch tool in half
The Saturn 4 cylinder engines were available in 2 styles, the single overhead cam and the dual overhead cam. In both engine types, the camshafts were always in the head, just under the top cover of the engine. If you remove the top cover (where you install the sparkplugs) you will see the camshaft(s).
You must remove the Timing chain cover and engine girdle.
On the 4 cylinder Saturn, follow the top radiator hose back to the engine. Note that there is a housing that is bolted to the engine to which the radiator hose is connected. Remove the radiator hose first, then remove the housing. On the 4 cylinder Saturn's, the thermostat is a part of that housing.
You remove and install the engine from the top.
see link below
Remove the air box cover and install the filter. You may have to remove the inlet tube(It does make it ewasier( Only took required is a flat screwdriver
No... check related link below for more info...
Drain the water from the cooling system of your 1992 Saturn. Remove the water hose. Remove the thermostat housing retaining bolts. Take the thermostat out. Reverse the process to install the new thermostat.
how to split the tranny from the engine