0
What else can I help you with?
How much horse power does a stock Olds 1970 442 w30 have?
Horsepower rating is 370 brake horsepower @5200 rpm. Since the regular 442 in 1970 had 365 hp @ 5000 rpm, it is believed the W30 was underated at 370 and is more like 420 bhp. Torque rating for the W30 is 500 lb ft @ 3600 and the non W30 is 500 lb ft @ 3200.
What color is a 1970 442 engine?
Gold.
How many 1970 Oldsmobile 442's were built?
19330.
How many w30 442 olds were built in 1970?
In 1970, a total of 2,999 Oldsmobile 442 W-30 models were built. This high-performance variant of the 442 was notable for its powerful engine and distinctive styling, making it a sought-after classic car today. The W-30 package included enhancements that contributed to its performance on the road.
How do you tell the difference between a 1970 Oldsmobile Cutlass S and a 442?
The most simple answer is to look at the second digit of the VIN. If its a "3", then you have a Cutlass model, if it is a "4", then you have a 442 model.
What color is the shocks on a 1970 oldsmobile 442 and the paint code?
OEM shocks were usually black.
Can a 1969 cutlass 442 front end fit on a 1970 cutlass 442 and if so can it take the value from the car?
It could fit, anddoing sowould very likely devalue the car.
What is 10 percent discount of 442 pounds?
10% discount applied to £442 = £397.8= £442 - (10% * £442)= £442 - (0.10 * £442)= £442 - 44.2= £397.8
How much horsepower does the 1972 Oldsmobile 442 350 V8 engine have?
The Oldsmobile 442 means (400 cubic inches-after '65) (four barrel carb) and (dual exhaust) if your car does not have these it is not a true 442. The 350 that year had only 160hp to 180hp but the 442 should have had the 455 and 270hp to 300hp. Are you sure your car is a 442? It may be a cutlass with a 442 paint job.
How much does it cost for a tailor to replace your jacket liner?
$442
How much national sanctuaries in India?
There are 442 sanctuary in India.
How hard and how much would it be to change a 1970 Oldsmobile 442 or 1970 Chevelle ss from auto to a 4 or 5 speed manual And if it is too hard what would it cost to have a professional do it?
not hard to do if you have all the parts on hand but you can figure on at least $1,000 in parts and if you have it done at least that amount to have it done.
