4 hours.
The valve cover gasket, on a 2004 Jeep liberty, can be found by removing the valve cover. Peel the gasket off of the head and replace with a new gasket.
Burn it! get a Japanese
Probably around $1200.
I have a 1999 jeep 4.0 . I usually work on my own vehicles . When the head gasket went I purchased the gasket , some brake and carb cleaner . Remove the head , clean reinstall new head gasket . I used a belt sander to clean the surface of the old head . Total cost $96 and about 10 hours of time
Well I have a '99 Jeep NDN Classic & I Love...and I love it....and to give you the skinny on it, I had the head gasket blown on cylinders 4 & 5, the initial coast was 870 done by a pro..then when the head came back from the machine shop..add 300 bucks...and total...hope this helps you out! just called in today for my 89 jeep it was 89.99 for mine at knects
its about 200 to 300 dollars but most of the cost is the labor just because its about 5-6 hour project and its alot of work to put in a new head gasket
I would suggest purchasing a shop repair manual for that vehicle if you intend on doing the job yourself.
The exact cost to repair a blown head gasket on a Jeep Cherokee varies. It should run between 20 and 40 dollars.
Blown head gasket
the head gasket
From $800 to $1200 depending on if the head is damaged or not.