For a 2009 Chevy Cobalt, it is generally recommended to change the Transmission Fluid every 30,000 to 60,000 miles, depending on driving conditions and usage. If the vehicle is frequently driven in harsh conditions, such as stop-and-go traffic or towing, more frequent changes may be necessary. Always consult the owner’s manual for specific guidelines tailored to your vehicle.
It has no stick.
6.9 QUARTS
its a closed for life transmition
For a 2009 Chevy Cobalt with an automatic transmission, you should use Dexron VI transmission fluid. It's important to ensure that the fluid meets the manufacturer's specifications for optimal performance and longevity. Always check the owner's manual for any specific recommendations or requirements.
The 2008 Chevy Cobalt typically requires about 6 to 8 quarts of automatic transmission fluid, depending on whether you're doing a fluid change or a complete transmission overhaul. It's important to use the recommended type of transmission fluid, which is usually Dexron VI for this model. Always check the owner's manual for specific guidelines and ensure the vehicle is on level ground when checking the fluid level.
To check the transmission fluid on a 2008 Chevy Cobalt, first ensure the vehicle is parked on a level surface and the engine is running. Locate the transmission dipstick, which is usually near the back of the engine compartment, and pull it out. Wipe it clean, reinsert it fully, then remove it again to check the fluid level, which should be between the "full" and "add" marks. If the fluid is low, add the appropriate type of transmission fluid through the dipstick tube.
In a 2009 Chevy Cobalt, the transmission fluid is added through the transmission dipstick tube. To access it, you'll need to locate the dipstick, which is usually found near the back of the engine compartment, towards the driver’s side. Make sure to use the correct type of transmission fluid specified in the owner's manual and check the fluid level with the dipstick after adding. Always ensure the vehicle is on a level surface when checking or adding fluid.
To change the transmission fluid on a 2007 Chevy Cobalt, first ensure the vehicle is on a level surface and securely elevated. Remove the transmission pan bolts and carefully drop the pan to drain the old fluid, then replace the filter. Reinstall the pan with a new gasket, refill the transmission with the appropriate type and amount of fluid through the dipstick tube, and check the fluid level while the engine is running and in park. Always consult the owner's manual for specific fluid capacities and recommendations.
The 2005 Chevy Cobalt with a 2.2L engine and automatic transmission typically requires Dexron III or Dexron VI transmission fluid. It's essential to verify the owner's manual for specific recommendations, as fluid specifications can vary based on production changes. Always ensure to use the correct type to maintain optimal performance and prevent transmission issues.
To add transmission fluid to a 2005 Chevy Cobalt, first ensure the vehicle is on a level surface and the engine is running. Locate the transmission dipstick, usually found near the back of the engine, and remove it. Using a funnel, slowly add the appropriate type of transmission fluid through the dipstick tube, checking the level frequently to avoid overfilling. After adding, reinsert the dipstick and check for any leaks.
I would cahange it at 50,000 miles.
Recommended at every 25,000