take arm rest off, take inside door handle and window handles off and then take screws out around the bottom of the panel and get something that will fit between the door and panel and pop the clips out all the way around and the panel comes off.
yes.
unbolt it from underneath the dash and pull it out.
window regulator.
there is no vin on the frame of a 67 chevelle.
To remove the wood-grained dash trim panel on a 1967 Chevelle, first, ensure the vehicle is turned off and disconnect the battery for safety. Carefully remove any screws or clips securing the panel, which are typically located around the edges. Use a trim removal tool or flat screwdriver to gently pry the panel away from the dash, taking care not to damage any surrounding components. Once loose, lift the panel straight out to avoid bending or breaking any tabs.
should be 2 phillips head screws holding it in.
the vin # is on the firewall on the drivers side and on the drivers side front door pillar
drivers side on the firewall on the vin plate and on the A pillar of the drivers side door.
To remove the kick panels from a 1967 Chevelle, start by using a flathead screwdriver to gently pry off any trim or covers that may be concealing screws. Next, locate and remove the screws securing the kick panel to the body of the car, typically found at the top and bottom edges. Once all screws are removed, carefully pull the kick panel away from the mounting clips or retainers. Repeat the process for the opposite side if necessary.
66 or 67
67 chevelle's never had fuel injectors, they had a carburetor.
chiltons repair manual from 67 at the library.