Have vehicle scanned and codes cleared - usually a problem in the emission control system
To reset the check engine light on a 1999 Dodge Intrepid, you can disconnect the battery by removing the negative terminal for about 15 minutes. This will clear the computer's memory and reset the light. Alternatively, you can use an OBD-II scanner to clear the trouble codes that triggered the light. However, if the underlying issue isn't resolved, the light may come back on.
Toyota engine code 402
To reset the check engine light on a 2000 Dodge Intrepid, you can disconnect the negative battery terminal for about 15 minutes. This will erase the trouble codes and turn off the light. Alternatively, you can use an OBD-II scanner to clear the codes directly. However, if the underlying issue causing the light to turn on is not resolved, the light will likely reappear.
My rpm light came on but not my check engine light so what does that mean when the rpm light is on
get your engin checked get your engin checked battery disconect for 3 min or take to auto parts and they can do it
same problem.
Have vehicle scanned to determine the problem
After repairing the cause of the code, you clear the code with a scan tool.
Check for a blown brake light fuse. Check for a broken or out of adjustment brake light switch.
Battery disconnect or a scan tool.
If you fix the reason the light came on in the first place the check engine light will reset itself after a few drive cycles.
After checking the code, and repairing the cause, you clear the code with a scan tool.