The process to replacing the window regulator involves removing the door panel,connections to the window switch and also the door handle bezels.
I've included a video that will show you exactly what tools you need and how to get at the window regulator so that it can be replaced.
Window regulator controls the up and down motions of your car window. Both electric and manual windows have a window regulator. Not the easiest part to replace, but once you dissembled the door panel it should be fairly simple to replace.
The panel where the regulator is detachable. You will be able to remove it very easily. When you remove the panel you will see the way how the regulator can be replaced.
HOW DO I REPLACE WINDOW REGULATOR MOTOR ON PASSENGER SIDE WINDOW
Begin by removing the inside door panel. Remove the wiring harness from the electric window regulator. Remove the window regulator retaining screws.
Here's how to test and repair power windowshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
if manual, window regulator. if electric, check fuses, window switch, window motor, window regulator.
How do you install a 1994 Chevy blazer electric window? In:http://wiki.answers.com/Q/FAQ/603[Edit categories]
how do I replace the passenger side window regulator on an E250, 2006. the window will not release to push to top of window frame only half way?
To replace your window, you need to have the window rolled up. On the regulator(that is the little arm that connects to the metal peice on the bottom of the window) is 11mm bolts. If you take those four bolts out, the metal sleeve on the bottom will come off. Clean out the old silicon. Put in new. Replace bolts.
replace the window regulator.
To replace a rear window regulator on 2005 CTS Cadillac remove the side protection panel of the car door then adjust the regulator.
To replace a 2001 Ford Focus window regulator, first, remove the door panel by unscrewing and unclipping it to access the regulator. Disconnect the window from the regulator, then unbolt the old regulator from the door. Install the new regulator in reverse order, reconnect the window, and reassemble the door panel. Finally, test the window operation before securing everything in place.