What year corvette? I have a 1989 Coupe and I removed the fuel door and the fuel boot and reached in through the access. You have to have skinny arms, though. It's a tight fit. I've read where some remove the inner fender, possibly the spare tire too or remove the rear fascia. Never tried those since I have skinny arms and can reach through after removing fuel door and boot.
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
It is possible that one of the bulbs is shorting out. Try replacing the brake light bulbs, if that doesn't work, troubleshoot the brake light switch.
The light assy has to be removed and the bulbs removed from the back.
Remove the two screws that hold the lens on, remove the lens and change the bulbs.
The brake light bulbs ar removed from the rear of the light assy . Take it off of the body.
Change the bulb and check to see if it's not grounding out.
If you mean the brake light, you just have to change the bulb or bulbs.
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
Brake Light ColorMine are clear bulbs ["white"] light, but the bulbs are mounted in an assembly with a red lens.
Headlight bulbs, high and low beam, parking light bulbs, signal light bulbs, brake light bulbs, dash light bulbs, interior light bulbs, plate light bulbs, etc.
back side of the brake pedal
just above the brake peddle