answersLogoWhite

0

The lamp just slips in and is held in place with a wee plastic clip. Look behind the light unit from inside the engine compartment and you'll see the clip, lift it up by using a screwdriver and the lamp just pulls out, I changed both of mine in five minutes.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

How do you change the right front turn signal lamp on a 1995 Chevrolet Camaro?

reach up under front bumper and twist the bulb out.


How do you change a front sidelight bulb on a 1992 Trooper?

Lift the hood of the Trooper. Remove the mounting screw on top of the head lamp housing near the signal lamp housing (1 Phillips screw). Pry the signal lamp housing gently towards the front of the vehicle. There is a snap mount keeping it in.


How do you change the brake lamp in a 1998 Lincoln Continental?

Which brake lamp are you needing to change? Brake/turn signal lamp.


How do you change turn front signal light in 1998 subaru outback?

Open hood panel and prop with rod. Remove screw at headlamp that holds signal lamp. pull lamp straight forward. remove and replace bulb


How do you replace front turn signal bulb 2004 range rover?

how do you take out the front signal lamp on a 2004 range rover


How do you replace a front signal lamp on 2005 Jeep Liberty?

# Disconnect and isolate the battery negative cable. # Remove the screw that secures the inboard side of the front park/turn signal lamp unit to the front bumper fascia. # Pull the inboard side of the lamp away from the fascia far enough to disengage the tab that secures the outboard side of the lamp from the slot in the front bumper fascia. # Disengage the lock feature and disconnect the wire harness connector from the lamp socket. # Remove the front park/turn signal lamp unit from the vehicle.


How do you replace a front turn signal lamp on a 1998 Camaro?

Under the front panel of the car


How do you change front turn signal lamp on Buick Terraza?

To change the front turn signal lamp on a Buick Terraza, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the turn signal assembly, then remove the screws or clips holding the assembly in place. Carefully pull out the assembly, twist the old bulb counterclockwise to remove it, and replace it with a new bulb. Reassemble the assembly and secure it back in place before testing the turn signal.


How do you repair a broken turn signal lamp on a 1992 Volvo 740 Wagon?

You need to replace it. There are 2 screws that hold it on.


How do you change front corner lamps on 1988 740 Turbo Volvo?

To change the front corner lamps on a 1988 Volvo 740 Turbo, start by opening the hood and locating the screws or clips that secure the corner lamp assembly. Carefully remove these fasteners and pull the assembly out from the front of the vehicle. Disconnect the bulb socket from the assembly, replace the bulb if necessary, and then reassemble by reversing the steps. Make sure the corner lamp is securely fastened before closing the hood.


How do you replace the front turn signal indicator assembly on a 1999 S70?

Begin by removing the wiring harness from your 1983 Volvo 240 turn signal lamp. Remove the turn signal lamp assembly retaining bolts. The turn signal lamp assembly will come out. Reverse the process to install the new turn signal lamp assembly.


How do you change the turn signal bulb on a chev s10 pickup?

For the front turn signal on a Chevy S-10 you remove the parking lamp lenses and replace the bulbs. If it is a rear turn signal bulb the taillight lenses will have to be removed to access the bulb.