0
simple take wheel off ....grab 6mm allen key socket.remove caliper[after takiung out 2 allen key bolts] pop out old shoes pop in new ones.put antiseize on bolt threads and bolt bushings ,replace caliper
Saturns use a 14mm hex socket to remove the caliper bolts, both front and rear ( for a rear disk brake option) always use anti seize on threads, but do not use anti seize on the bushings. use Sylglyde or some type of impurity free grease. Anti seize is made up of aluminum shavings, and will actually inhibit the proper movement of the caliper pins against the bushings.
What else can I help you with?
How do you change brake pads on a 98 acura integra?
you buy brake pads and you change them
How do you change front brake pads on a 98 Eclipse?
Get a manual on your car from the parts store.
Is it easy to change the front brake pads on a '98 Pathfinder?
yes it is just a couple of bolts and the pads slide out easy
How do you change rear disc brakes on 98 avenger?
Begin by removing the tire and wheel from your 1998 Avenger. Remove the brake spring and the brake caliper. The brake pads will come off. Reverse the process to install your new brake pads.
After changing pads and rotors and spraying antidust compound on the back of the pads on a 98 Saturn SL2 how do you stop squealing from your front brakes?
Cheap brake pads will squeel. If you bought cheap brake pads, that's probably it. Also, make sure you apply brake grease to the back of your pads (do NOT apply the grease to the side of the pad coming into contact with the rotor, apply it to the other side coming into contact with the caliper). If you don't apply break grease, this will also cause squeeling.
How do you change emergency brake pads on a 98 Volvo s70?
To change the emergency brake pads on a 1998 Volvo S70, first, lift the rear of the vehicle and remove the rear wheels. Next, access the brake assembly by removing the brake drum or rotor, depending on your model. Remove the old emergency brake pads from the caliper or backing plate and install the new ones, ensuring they are properly aligned. Finally, reassemble the brake components, replace the wheels, and lower the vehicle. Always check the adjustment of the emergency brake after installation.
How do you change your front brake pads of your 98 Toyota Sienna?
Lift the car, remove the tire, remove the brake shoe/caliper and remove the old brake pad. Next, put in the new brake pad, replace the brake shoe/caliper, replace the tire and lower the car.
How do you change the brakepads on a 98 achieva sl?
Take off the wheel, then you will see the caliper, on the back of the brake caliper there are two hex head Allen bolts, take those out then you will be able to pry off the caliper. once the caliper is off change the brake pads and put it back together!
How do you reset the brake lining code on a 98 Mercedes E-320?
When you replace the brake pads also replace the brake padsensor (used sensorwill not turn out lights), then the light will reset itself automatically
Specifications 1998 Buick Park Ave rear brake rotor?
Specs 98 Buick Park Ave rear pads
How do you change the front brake pads on a 98 grand Cherokee Laredo?
Buying a Jeep Grand Cherokee Manual would be your best bet, but in a short version to install the front brake pads or any other brake pads. Jack up the jeep block the wheels, put jack stands underneith the axle you are working on, take the tire off, once off set the tire half way under the rock gaurd. Unbolt your brake caliber which is two bolts from inbehind the rotor, once bolts are out, take off brake caliber slowly. there is two brake pads left and right pull them out then do reverse of what you just did to take them out.... Good Luck
Change rear brake pads 98 Mitsubishi montero sport?
Lift up your cart using jack stands for safety. Remove the wheel and take the brake hose off of the caliper body. Remove the two pins that secure the caliper to the bracket and pull of your rotor.
