answersLogoWhite

0

There is no dip stick on a 2008 Chevy Cobalt.....they made it difficult so you can't check it yourself and you have to take it to a dealer ship so they can make money off of us. One has to completely drain the transmission to know how much transmission fluid is in there and then you have to put the exact amount in that the manual calls for....and of course you want to put new fluid back in. After my car had been fixed in the auto body shop, I noticed my transmission was not shifting right on my 2008 Chevy Cobalt. Long story short, after 2 months finally someone listened to me and I found the leak myself. I took pictures of it dripping and the auto body shop tried to say it was a piece of dirt and all was well. It was still leaking I took it back into the auto shop and it was a loose o ring that they never tightened. It has been almost a year since the problem has been fixed and since the Transmission Fluid went so low,,,,I now have a hesitation when I turn left for over a year now. Had I been able to check the transmission fluid, I would have know for sure the transmission fluid was low and the problem would have never got this far. I am a female.....but I usually can tell what is wrong with the car....call it gut instinct. I was right from the beginning that something was up with the transmission. I hope they change this in the future on vehicles and put the dip stick process back so we can check it ourselves.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Where do do check the transmission fluid on a 2005 Chevy Cobalt?

It has no stick.


How do you check the transmission fluid on a 2008 Chevy Cobalt?

To check the transmission fluid on a 2008 Chevy Cobalt, first ensure the vehicle is parked on a level surface and the engine is running. Locate the transmission dipstick, which is usually near the back of the engine compartment, and pull it out. Wipe it clean, reinsert it fully, then remove it again to check the fluid level, which should be between the "full" and "add" marks. If the fluid is low, add the appropriate type of transmission fluid through the dipstick tube.


What kind of transmission fluid do you use for 2009 Chevy Cobalt automatic car?

For a 2009 Chevy Cobalt with an automatic transmission, you should use Dexron VI transmission fluid. It's important to ensure that the fluid meets the manufacturer's specifications for optimal performance and longevity. Always check the owner's manual for any specific recommendations or requirements.


How much transmission fluid does a 05 Chevy Cobalt take?

6.9 QUARTS


How much transmission fluid in Chevy Cobalt 2008?

The 2008 Chevy Cobalt typically requires about 6 to 8 quarts of automatic transmission fluid, depending on whether you're doing a fluid change or a complete transmission overhaul. It's important to use the recommended type of transmission fluid, which is usually Dexron VI for this model. Always check the owner's manual for specific guidelines and ensure the vehicle is on level ground when checking the fluid level.


How do you check transmission fluid lever 2001 Chevy Metro?

how do you check transmission fluid level in a 2001 chevy metro


What kind transmission fluid do you use for a 2006 Chevy Cobalt?

its a closed for life transmition


Where does the transmission fluid go in a 2009 Chevy Cobalt?

In a 2009 Chevy Cobalt, the transmission fluid is added through the transmission dipstick tube. To access it, you'll need to locate the dipstick, which is usually found near the back of the engine compartment, towards the driver’s side. Make sure to use the correct type of transmission fluid specified in the owner's manual and check the fluid level with the dipstick after adding. Always ensure the vehicle is on a level surface when checking or adding fluid.


How do you change transmission fluid 2007 Chevy Cobalt?

To change the transmission fluid on a 2007 Chevy Cobalt, first ensure the vehicle is on a level surface and securely elevated. Remove the transmission pan bolts and carefully drop the pan to drain the old fluid, then replace the filter. Reinstall the pan with a new gasket, refill the transmission with the appropriate type and amount of fluid through the dipstick tube, and check the fluid level while the engine is running and in park. Always consult the owner's manual for specific fluid capacities and recommendations.


How do you check Transmission Fluid on a 2002 Chevy Impala?

how do you check transmission leval on a 03 Chevy impala


How do you add transmission fluid in a 2005 Chevy Cobalt?

To add transmission fluid to a 2005 Chevy Cobalt, first ensure the vehicle is on a level surface and the engine is running. Locate the transmission dipstick, usually found near the back of the engine, and remove it. Using a funnel, slowly add the appropriate type of transmission fluid through the dipstick tube, checking the level frequently to avoid overfilling. After adding, reinsert the dipstick and check for any leaks.


How do you check the transmission fluid in a 95 Chevy cavalier?

You can check the fluid in your 1995 Chevy Cavalier transmission with the transmission dipstick. The transmission dipstick will be on the left-hand side of the transmission and have a bright yellow handle.