answersLogoWhite

0

To connect an amplifier to the radio in a 1996 Chevy Astro, first, disconnect the battery to avoid any electrical issues. Then, locate the radio harness and identify the speaker wires; you can use a wiring diagram specific to your vehicle for accuracy. Connect the amplifier's power wire to the battery, the ground wire to a solid metal point, and the speaker wires from the radio to the amplifier's input. Finally, connect the amplifier's output to the vehicle's speakers and reconnect the battery.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

How do you wire an amp to a 2006 Chevy Cobalt factory radio?

To wire an amplifier to a 2006 Chevy Cobalt factory radio, you'll typically need a line-out converter to tap into the speaker wires since the factory radio doesn't have RCA outputs. First, locate the speaker wires at the back of the radio and connect the line-out converter's inputs to these wires. Then, connect the RCA outputs from the converter to the amplifier. Finally, connect the power, ground, and remote turn-on wire from the amp, making sure to follow proper safety and electrical guidelines.


What would be the best way to connect a radio to a 1993 Chevy Astro so it always has power - even if the vehicle is turned off?

In my 1995 astro the radio is connected directly to the battery with a wire that is routed out through the drivers side door. So it always has power.


How do you remove the radio of a 1999 Chevy Astro?

Try the installdoctor.com. Worked for me.


Is there a amplifier in 1997 subaru legacy that you need to connect to get sound from radio?

No, the radio has its own built-in amplifier. If you're not getting sound from ANY speakers, your radio is probably broken and needs to be replaced.


What to do if Chevy astro does not start?

i replaced the steering column and the fuel filter. the radio was stolen


Do you get a small amplifier that you can install in a car door and connect on the speaker line that comes from the radio?

No. You buy a waring harness and connect it to the car wiring and the amp to the speakers there behind the radio.


Where is 2002 Pathfinder radio amplifier located?

The 2002 Nissan Pathfinder radio amplifier is contained in the radio. The amplifier cannot be separated from the standard radio.


AC Delco Radio wiring for speakers from Chevy Astro van?

yew put pew in your tt hoewl


Where can you get replacement volume button for 1997 astro radio?

You maybe able to order it from a Chevy dealer or find a junk yard in your area


Where is the radio speaker amplifier in a 1998 Dodge Ram Van 1500?

In the radio, there is no other amplifier.


Radio wiring diagram 2007 Chevy silverado?

Here is the info in your vehicle: Radio 12v red/white + radio harness Radio Ground black - radio harness Radio Ignition (GMLAN Serial Data) Radio Illumination yellow (dimmer) + radio harness Factory Amp Turn-on same as power antenna wire Power Antenna white + radio harness LF Speaker +/- tan - gray +,- radio harness or amplifier Notes: If equipped, the amplifier is under the rear of the center console. At the amplifier, the left subwoofer wires are dk. blue/white (+) - lt. green/black (-). The right subwoofer wires are dk. green (+) - lt. blue/black (-). RF Speaker +/- lt. green - dk. green +,- radio harness or amplifier LR Speaker +/- brown - yellow +,- radio harness or amplifier RR Speaker +/- dk. blue - lt. blue +,- radio harness or amplifier


Where is the body control module located on Chevy Astro 2000?

In my 2004 it is located on top of the radio. A real pain to get to. You have to remove the radio and alot of the AC stuff. Good luck.