0
What else can I help you with?
Is it easy too fix the heater core in a 2000 ford windstar?
no no
How do you fix 1994 ford windstar no spark no gas?
Easy, get rid of it
How do you fix a ford windstar if it running lean?
If you are getting a Lean code then it is probably being caused by the intake plennum gaskets. This is a common problem on the Windstar. The fix is relatively easy.
2001 Ford Windstar burning oil how to fix this problem?
2001 ford winstar sport burning engine oil
How do you fix both cigarette lighter sockets on your 2003 Ford Windstar - no power?
did you try the fuse?
How do you Replace fuel injector on 2000 ford windstar 3.8?
where is the #5 injector? how long does it take to fix
How much would it cost to fix a rack n pinion on a 2002 ford windstar van?
about $1100.00
How can you disable or unplug the ABS in a '96 Ford Windstar if it cycles at inappropriate times and it is too expensive to fix?
Pull the fuse. In 1996 Windstar, it's fuse #33
Where should i begin to look for high idle around 2000 rpm continuously on a 1996 Ford Windstar?
checked all vacuum lines ,no problems. Turns out to be IAC valve , quick fix, running good, for now until something else goes south.
How do you fix obd code p0301 on ford windstar?
Trouble code P0301 means: Cylinder 1 Misfire Detected
How do you fix the 2002 Ford Windstar's drivers seat?
Unplug it now! Our 2002 Windstar LX almost burst into flames this morning because the malfunctioning Driver's seat drive motors shorted out! Take Windstar to Ford and have the undercarriage framework replaced before yours also overheats and starts a fire.
1996 ford windstar and it kills when it is at idle unless you rev up the engine why does it kill .ive changed the spark plugs fuel filiter and oil.any suggestions?
Engines that "Die" while IdlingThere could be several causes for stalling at idle, but from your description of what you've done, I suspect that the most probable cause may be:The "idle speed" setting is not adjusted properly.The "proper fix" for this is for someone who know what he or she is doing to properly adjust the idle speed setting.
