To install a transmission cooler on a GMC 2500 Vandura with a 5.7 engine, first, gather the necessary tools and the appropriate cooler kit. Begin by disconnecting the battery and draining the Transmission Fluid. Mount the cooler in a suitable location, typically in front of the radiator, ensuring good airflow. Connect the transmission lines to the cooler, using the provided fittings, and refill the transmission fluid before reconnecting the battery and checking for leaks.
4L80E is in most vanduras of one ton 2500 and below is 4L60E
hydromatic 400
The ECM on the Vandura 2500 is under the Driver's seat.
There are to sizes 110"and 125".
3254
.all I can say is my '92 2500 vandura has a 350 in and it does the job...don't know if all of 'em are the same size or not dt
Some do and some don't. Crawl under the vehicle, follow the transmission lines to the radiator, and see if there is an secondary cooler anywhere. If it came with the factory towing package it does.
My 93' vandura has a 5.7 liter 350cubic inch engine.
If its a 3 speed auto, I would say its a Turbo 350. If its a overdrive auto (4 speed) I would say its a 700R4.
Yes
Ebay =)
The transmission relay on a GMC Vandura 2500 is typically located in the fuse box, which is usually found under the dashboard on the driver's side or in the engine compartment. The exact position may vary slightly depending on the model year, so it's advisable to consult the owner's manual for the specific relay diagram. Additionally, it may be helpful to check for any labeling on the fuse box cover.