0
To program the key yourself you need two working transponder keys.
Here is the procedure:
1. Insert an existing working key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing working key and, within five seconds, insert a second working
key and turn it to ON (RUN) then back OFF.
4. Remove second working key and insert the new key before ten seconds have
elapsed and turn it to ON (RUN). Leave it on for one second and turn back to OFF.
5. The security light will light up for three seconds to indicate that the new
key has been successfully programmed.
If you don't have two working keys you need to go to a locksmith or a dealership to have it programmed with specialty equipment.
I'am going to assume you want programming instructions for the transponder (transmitter responder) keys on a Ford Windstar.
In order to do the programming yourself you will need two already programmed keys. If you don't have two then you can't access your car's learn mode feature.
The Programming procedure is as follows:
1. Insert an existing working key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing working key and, within five seconds, insert a second working
key and turn it to ON (RUN) then back OFF.
4. Remove second working key and insert the new key before ten seconds have
elapsed and turn it to ON (RUN). Leave it on for one second and turn back to OFF.
5. The security light will light up for three seconds to indicate that the new
key has been successfully programmed
What else can I help you with?
Where is the air flow relay in 2000 Ford truck windstar?
where is air flow relay on 2000 ford windstar
Where is the transmission control solenoid in your 2000 ford windstar?
where is the tcm in a windstar 2000 located
What kind of oil do you need for a 2000 ford windstar?
According to the 2000 Ford Windstar Owner Guide ( 5W-30 )
Where is the inertia switch in a 2000 ford windstar?
In the cargo area , on the passenger side , behind the service panel ( on a 2000 Ford Windstar )
How many gallons of gas can a 2000 Ford Windstar hold?
According to the 2000 Ford Windstar Owner Guide : ( 26.0 U.S. gallons )
How big is a 2000 ford Windstar gas tank?
According to the 2000 Ford Windstar Owner Guide : ( 98.4 litres / 26.0 U.S. gallons )
How many tons does a 2000 ford Windstar weigh?
How many tons does a ford windstar van weigh
What is the torque specs for a connecting rod on a 2000 ford windstar 3.8 liter?
whats the torque odn a 2000 ford windstar 3.8 connecting rod
What brake fluid to use in 2000 ford windstar?
In a 2000 Ford Windstar : ( DOT 3 brake fluid meeting Ford specification ESA-M6C25-A ) according to the Owner Guide
Does your 2000 ford Windstar have a chipped key?
The 2000 Ford Windstar does not typically come with a chipped key, as it was produced before the widespread use of transponder keys in many vehicles. Instead, it generally utilizes a standard metal key for ignition. However, some models may have had optional security features, so it's best to check your specific vehicle's key or consult the owner's manual for confirmation.
How do you program my transponder key?
I don't program your transponder key. Try taking it back to a garage of the same type as your car e.g ford and they may be able to provide some help.
How do you turn off traction control on 2000 Ford Windstar?
You can switch the traction control system off using the switch to the left of the radio on a 2000 Ford Windstar
