In the 2002 R/T model, (I don't know if this is true for the other models or not) pull the boot down a bit, push the knob down, turn left, and it pushes itself right off.
You need the user manual which has steps on how you can replace a shifter knob on a 2002 Dodge RAM 1500 with standard transmission.
For a manual transmission it unscrews counter-clockwise.
== ==
unscrew it. counter clockwise.
To remove the shift knob on a 2010 Dodge Challenger with a manual transmission, first, ensure the car is in neutral. Then, locate the set screw on the side of the shift knob, usually hidden under a small cap or directly visible. Use an Allen wrench to loosen the screw counterclockwise until the knob can be pulled off. If necessary, gently wiggle the knob to help it come free.
First remove the shift knob pattern (it can be pried out with a small screw driver). Next remove the alignment pin with a pair of pliers. Then the shift knob can be unscrewed.
remove it
If you have a manual transmission, the shift knob should just unscrew off. If you have an automatic transmission, use a small (T5, I believe) Torx screwdriver and remove the small screw from the left-hand side of the shift knob, below the TCS button. Once that is removed, just carefully lift the knob straight up. The wires for the TCS button may be short, however, and you may need to clip them.
Grab and twist to the left... DONE!
remove the shift knob,t bar, shifter boot and plate, the switch is attached with 2 screws
Is this a standard transmission, or an automatic? automatic
pull the shift boot down. loosen the jam nut under the shift knob then unscrew the shift knob.