Assuming that you mean wiper blade (blade and frame) rather than wiper arm (piece from the spindle at the hood to the wiper blade), the 2002 Lincoln Town Car has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
wiper motor on lincoln towncar 02
The wiper motor for a 1999 Lincoln Town Car is located under the windshield cowl panel on the driver's side. To access it, you'll need to remove the cowl cover and any necessary trim pieces. The motor is typically mounted near the base of the windshield, connected to the wiper linkage.
The 2002 Lincoln Town Car has the most common hook-end wiper arms. See Sources and Related Links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
where is the wiper module located on a 1996 town car
The wiper cowl is the area at the base of the windshield that houses the wiper motor.
remove the air cleaner box it is underneath
Remove the wiper arms first. Then remove the torx screws that hold the plastic cowl in place.
Assuming this is a Town Car, remove the wiper arms and plastic cowl molding. Lift the filter out, and put a new one in it's place. Replace the molding and wiper arms.
Left side, on the firewall by the wiper motor
Yes
Yes.
at the base of the wiper the cover can be lifted so you can access the nut and remove the wiper. Once that is off you can remove the base cover to get to the motor.