actually I broke the hood release latch on my 1991 Plymouth voyager, and I can't get the hood open, what can I do?
I have a 96 Chevy Blazer S-10 and the latch to open the window in the back hatch will not work. How do I replace the motor?? or whatever to repair?
To repair the driver side door latch assembly on a 1992 Plymouth Sundance, first remove the door panel to access the latch mechanism. Inspect the latch for any broken components or misalignment; lubricate moving parts if necessary. If the latch is damaged, replace it with a new or used part, ensuring proper alignment with the locking mechanism. Reassemble the door panel and test the latch to confirm it opens smoothly from the outside with the key.
To repair a stuck minivan rear hatch, first inspect the latch mechanism for any visible obstructions or debris. If the latch is jammed, try using a lubricant like WD-40 to loosen it. If the electronic release is malfunctioning, check the fuse and wiring connections. If these steps don't resolve the issue, you may need to remove the interior panel to access and manually engage the latch.
May be a BCM glitch or the rear trunk latch there is a recall from gm about the rear hatch latch
To fix the hatch latch on a 1998 Subaru, first, inspect the latch mechanism for any debris or rust that may be causing it to jam. Clean the latch and apply lubricant to ensure smooth operation. If the latch is damaged, you may need to replace it by removing the interior panel to access the latch assembly. Reassemble everything carefully, ensuring the latch aligns properly with the hatch.
To replace the hatch latch on a Nissan Murano, first, open the hatch and remove any trim panels covering the latch assembly. Disconnect the electrical connector and unbolt the latch using the appropriate socket or wrench. Install the new latch by reversing the removal process, ensuring all connections are secure, and finally, test the hatch operation before reassembling the trim.
glue hatch window latch
The back hatch will often not open if the internal mechanism or release has become damaged. Replacing the latch is the most effective and reliable fix.
You will see a small round plastic plug in the inside door panel on the tailgate. Carefully remove the plug (it breaks very easily). Through this hole you can trip the latch. You will have to feel around with a single finger. It is not an easy thing to do. The lever moves toward the driver's side to trip the latch. If your tailgate is damaged, you may need help pushing it open from the inside, but be careful your finger does not get caught in the hole, there are sharp edges inside.
How to repair the rear door latches on my e 350 van. The bottom latch will not hold . How do I get the latch to hold Thanks
To repair a bathroom door latch that is not functioning properly, you can try tightening the screws on the latch plate, lubricating the latch mechanism with graphite powder or silicone spray, or replacing the latch mechanism altogether if necessary.
Our mechanic had to climb through the inside of the car, into the trunk area and open it by removing the hatch cover. That's the only way he could replace the latch.