Unless you have lost the nozzle there is no reason to ever replace it. It is probably stopped up. Take a needle and unstop it.
Replace it with new tubing.
I had mine changed by American Mobile Glass and it cost $145.00 and they came to my job and did it.
No, a Generation 2 (1992-1995) Taurus/Sable Windshield will NOT fit a Generation 3 (1996-1999) Ford Taurus/Sable.
Generally, if the motor is working on windshield wipers, the problem is electrical. Check the fuses and the wiring to see if something needs replaced.
Yes, it is identical.
1999 mercury sable horn replacement
take pair of plyers and grap the clamp and pull toward the center of the hose you will need to do this twice then put the new one on withthe same clamps the hose should come out of the bottmom of the windshield reservor
what is the cost to replace the rack and pinion on a 1994 mercury sable
Replace engine cushions
Driver Side on dashboard, under where your stickers on your windshield would be if they are on the left side.
In a 1995 Mercury Sable, the windshield washer fuse is located in the fuse panel, which is typically found under the dashboard on the driver's side. You can identify the specific fuse for the windshield washer by referring to the fuse diagram on the fuse panel cover or in the owner's manual. The fuse for the windshield washer is usually labeled as "Washer" or similar. If the fuse is blown, replacing it should restore functionality to the windshield washer system.
In front of the driver under the hood near the top of the driver side strut mounted to the firewall.