0
You will need to disconnect battery, remove horn pad, pull steering wheel with wheel puller,remove some dash plastic, and once you are that far it is a matter of removing a few torx fasteners, dropping the column, ( two bolts) and feeding the harness down. Basic tools. It may sound harder than it is; it's not that bad. Good luck.
What else can I help you with?
How Do You Replace A Headlight Switch In A 1993 Oldsmobile Cutlass Ciera?
how do you replace the headlight switch on a 1993 cutlas ceria*
How do you replace the ignition switch on a 1992 Oldsmobile Cutlass Ciera?
It is bolted on the steering column behind the dash, along with the dimmer switch. You have to drop the column and unscrew the switch. Problem is, the plug with the wiring also has the wiring for the turn signals and dimmer switch. You may have to do some splicing unless you want to feed a harness up the column.
Does a 1992 Cutlass Ciera have a fuel pump reset switch?
no
How do you reset computer on 1995 Oldsmobile cutlass ciera?
can i reset it or replace it ,where is it on the car
Where is the inertia switch located on a 1993 Cutlass Ciera?
It does not have one (only fords products have them)
Replace the ecm on 91 cutlass ciera?
The ECM is located behind the glovebox on a 1991 Cutlass Ciera. Pull the glove box out to see it. Once located remove the mounting hardware and unplug it from the car. Replace the unit.
Can doors from a 1990 Olds Cutlass Ciera sedan be used to replace the doors on a 1990 Olds Cutlass Ciera station wagon?
yes, most of the panels can be used from one to the other
Do you have to drop the tank on your 1986 oldsmobile cutlass ciera to replace the fuel pump?
Yes, you do.
Where is the fan relay switch for a 1989 Oldsmobile Cutlass Ciera with a 2.8 engine located?
where is the horn relay
How do you change the ignition switch for a 1995 Cutlass ciera?
To change the ignition switch on a 1995 Cutlass Ciera, start by disconnecting the negative battery cable to ensure safety. Remove the steering column covers by unscrewing the screws, then locate the ignition switch, which is typically mounted on the steering column. Disconnect the wiring harness from the old ignition switch and unbolt it from its position, then replace it with the new switch and reassemble everything in reverse order. Finally, reconnect the battery and test the new ignition switch to ensure it functions correctly.
Where is the brake light switch located on a 1990 Cutlass Ciera?
The brake light switch is located on a bracket behind the brake pedal support.
Where is the speed sensor located on a 1994 cutlass ciera?
where is cam senor on a 91 cutlass ciera 3300
