To replace the distributor on a 1984 Pontiac Fiero 2.5 L 4-cylinder, first disconnect the battery and remove the air cleaner for better access. Then, mark the position of the existing distributor and disconnect the wiring and vacuum advance hose. Unscrew the distributor hold-down clamp, lift out the old distributor, and carefully insert the new one, aligning it with your markings. Reconnect the wiring, vacuum hose, and air cleaner, then reconnect the battery and start the engine to check for proper operation.
How do you replace the alternator on a 1988 Pontiac Fiero
Pontiac Fiero was created in 1984.
first of all stop putting water in the fuel tank second move the car to a heated environment
1-2-3-4-5-6 Distributor rotates clockwise.
Left passenger side standing in the front of vehicle.
You can't. You need to replace the faulty and worn parts.
what is the smog and vaccum diagram for the 87 Pontiac fiero 2.5L 4 cylinder what is the smog and vaccum diagram for the 87 Pontiac fiero 2.5L 4 cylinder
it look lik you dont know realy what im asking!
Yes, sort of, The clutch is different.
Fuel pump in a Fiero is electric. It's in the gas tank. Gas tank's in the middle of the car. Drop the tank. Pull the pump.
what is the fuel pressure on a 1987 fiero gt
the ignition system would be a HEI or high energy ignition with a distributor cap and rotor. this would refer to the 2.8 liter v6