If you mean the orifice tube, it is in the low pressure line. If there is a hex nut in the line, you can separate the two parts and remove the orifice tube. If there is no nut, just a crimp, the line must be cut and a repair kit installed to contain the new orifice tube.
mercury villager heater core 2001
Yes.
No , the 3.3 litre V6 engine in a 2001 Mercury Villager has a timing BELT
Yes it is exactly the same.
Flasher modules are normally near the fuses in the fuse box.
According to the 2001 Mercury Villager Owner Guide : ( 75.7 litres / 20.0 U.S. gallons )
According to the 2001 Mercury Villager Owner Guide : ( 75.7 litres / 20.0 US. gallons )
This is usually cause by a stuck brake light switch on the brake pedal. Replace it.
20 gallons. http://consumerguideauto.howstuffworks.com/2001-mercury-villager-3.htm a simple Google search yields amazing results!
Begin by removing the inside door panel of your 2001 Mercury Villager. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
Yes , according to the Gates website ( they make timing belts etc. ) the 3.3 liter V6 engine in a 2001 Mercury Villager is an interference engine
On the rear side of the throttle body.