0
I just changed my yesterday on my 2003 Ford Focus LX. I got a 2x4 piece of wood and a regular floor jack. What you do is stick the 2x4 on the floor jack and slide it under the car and slowly lift the engine up. Remove the 10mm bolt holding the coolant tank on, then pry the plastic tab on the strut side of the tank off the metal bracket. You will need a 15mm and a 18mm deep socket and an extension. I unbolted the two 18mm then three 15mm bolts. You'll need a breaker bar and 18mm deep socket to get the nut off the bottom of the motor mount.
What else can I help you with?
What does a mechanic charge to replace a motor mount on a 2002 ford focus?
About $300.
How do you replace the motor mount on a 2002 ford focus?
You have to take the tire off and go in from there.
How much to replace Mazda 3 motor mounts?
I had it done at the dealer, it was $260 for front mount on passenger side.
How do you replace the motor mount on a 2000 Ford Focus?
Remove the radiator overflow resevoir(the clip will probably break, no big deal), jack the engine up a few inches with a floor jack, remove the bolts holding the motor mount on and replace.
How do you repair a 2003 Ford Focus fan with a rattling sound?
motor mount motor mount
How do you replace motor mount on a 1996 z28 comaro and location of the passenger?
To replace the motor mount on a 1996 Z28 Camaro, first, lift the vehicle securely and remove the front wheels for better access. The passenger side motor mount is located between the engine and the frame, accessible from above or below. Support the engine with a jack, remove the old mount's bolts, and install the new mount in reverse order, ensuring all bolts are torqued to specifications. Finally, lower the vehicle and check for proper alignment and clearance.
How do you remove a passenger motor mount?
in removing motor mount what bolts need to be removed. This is a 1998 biuck regal 3.8L, and I am not sure how to remove the motor mount.
How do your replace rear motor mount ford focus?
You need to put the car on jack-stands, remove the wheel and the splash pans, remove the bottom fastener, lift the engine and remove the mount, replace in reverse.
How do you replace a motor mount on a 1995 Chevy Corsica?
You can replace your 1995 Chevy Corsica motor mount by loosening the motor mount retaining bolt. Jack the engine up approximately 3 inches. Remove the motor mount retaining bolt and the motor mount bushing. Put the new motor mount bushing in and reverse the process.
How replace a motor mount on a 1997 geo prizm?
Remove the old mount & replace with the new.
Fix motor rear motor mount dodge neon?
There is no fixing a broken motor mount. Replace them with a new ones.
How do you replace motor mounts on Buick rendezvous?
replace 2002 Buick rendevous motor mount
