0
I have a 1990 Mercury Sable V6 3.0L, and for me the PCV valve is located on the valve cover behind the intake manifold, to the left (if you're facing the front of the car). With the engine cold (has not run in the past 2-3 hours), locate the PCV valve (it has a black plastic 'elbow' attachment, and is approx. 2" tall). There should be two hoses leading out of the PCV valve.
Since the engine is cold you should be able to use your fingers to feel the hoses and follow them to see where they connect. I know that the thicker one leads to a metal nipple behind the intake manifold (a flashlight and small mirror may be helpful to see the parts behind the intake manifold). I didn't feel any clamps on mine, so when I replace my PCV hose I'll just slide off the old one and insert the new one.
If you have clamps fastening your PCV hose to the PCV valve or intake manifold nipple, release the clamps and then pull off the old hose. I think new hoses are designed to be snug by themselves, so after inserting the new hose you should be done (no clamps required).
What else can I help you with?
How do you change an air conditioner hose on a 1996 Mercury Sable GS?
Hey Jennifer==Simply take the hose off and replace it. Then evacuate the system and add refrigerant. GoodluckJoe
How much should it cost to replace a lower radiator hose on a mercury sable?
The cost to replace a lower radiator hose on a Mercury Sable typically ranges from $100 to $200, depending on labor rates and parts prices in your area. The hose itself usually costs between $20 and $50, while labor can add an additional $80 to $150. It's advisable to get a quote from a local mechanic for a more accurate estimate.
Where is the thermostate located on a 2000 mercury sable?
On a 2000 Mercury Sable, the thermostat is typically located at the engine end of the upper radiator hose, where it connects to the engine. To access it, you may need to remove the upper radiator hose and the thermostat housing. Ensure the engine is cool before attempting to locate or replace the thermostat to avoid burns or injury.
Why does power steering fluid leak out of 1997 mercury sable?
It's possible a seal has broken. Find where it leaks from, could be pump, hose or steering ram. Then replace part.
Where does the vacuum hose from the fuel lines on a'92 Mercury Sable go and come from?
Get a vacuum diagram from MOTORLIT.COM
How do you replace the windshield wiper fluid hose on a Ford Taurus - Mercury Sable?
take pair of plyers and grap the clamp and pull toward the center of the hose you will need to do this twice then put the new one on withthe same clamps the hose should come out of the bottmom of the windshield reservor
Why would a 1998 Mercury Sable stall and idle rough?
check pcv hose elbow for vacuum leak.
Why would you have a fuel smell in a 1998 Mercury Sable?
Fuel leak at hose or fitting Carbon canister is exhausted
Can you please give me a picture of my thermostat on my mercury sable 1996?
It is located where the upper radiator hose connects to the engine.
How do you change a thermostat on a 2002 Mercury Sable?
To change the thermostat on a 2002 Mercury Sable, first ensure the engine is cool, then disconnect the negative battery cable. Drain the coolant from the radiator, remove the upper radiator hose from the thermostat housing, and unbolt the thermostat housing. Replace the old thermostat with a new one, ensuring it's oriented correctly, reassemble the housing, reconnect the hose, refill the coolant, and finally reconnect the battery.
How do you repair a leek in the windshield wiper hose on a Mercury Grand Marquis LS 2002?
Replace the hose.
How to replace Mercury tracer radiator hose?
Drain the Mercury Tracer radiator into a pan. Loosen the clamps at the ends of the radiator hose. Wiggle the hose to free the ends. Slide the hose off and replace it. Tighten the clamps an refill the radiator. Dispose of the old antifreeze as it is toxic to animals.
