Remove upper and lower engine intakes. Tie back or label tubes so not to loose reconnections. Once everything is remove the gasket is exposed. Pull gasket replace, then return intakes and labeled tubes.
Yes.Yes.
One hour
Take it off, replace the gasket
remove old thermostat and replace with new thermostat and gasket
The price to replace a blown head gasket on a Chrysler Sebring V6 should be around $1,000.00. The price can vary depending on where you have the repairs made or if you replace it yourself.
To replace the water pump on a 2002 Chrysler PT Cruiser, begin by disconnecting the negative battery terminal. Drain the coolant, then remove the drive belt and the timing belt cover to access the water pump. After removing the old pump, clean the mating surface, install the new pump with a new gasket, and reassemble everything by reversing the disassembly steps. Finally, refill the coolant and reconnect the battery.
You can change a head gasket if that is all that is wrong.
Low coolant, plugged radiator, inoperative radiator fan, failed water pump, head gasket, thermostat.
In short you have to take the head off, replace the gasket/s and replace the head. You best bring it to a pro.
Low coolant, failed radiator fan, plugged radiator, failed water pump, head/head gasket.
Low coolant, failed water pump, thermostat, plugged radiator, inoperative radiator fan, head/head gasket.
sway bar must be disconnected so you can move it out of the way