To replace the steering on a 1994 GMC Suburban, start by safely lifting the vehicle and removing the front wheels to access the steering components. Disconnect the steering shaft from the steering box and remove any necessary bolts to detach the steering box from the frame. Install the new steering box by reversing the removal process, ensuring all connections are secure. Finally, reconnect the steering shaft and align the wheels before lowering the vehicle back to the ground.
Suburban
I had the switch assembly on the steering column get burned-up at it caused my headlights to go out. It cost about $250 to replace.
Near steering column
Remove door panel and replace latch mechanism
r12
they are 4 by 8
YES.
To replace the power steering pump on a 1999 GMC Suburban, start by disconnecting the negative battery cable. Remove the belt from the pump, then disconnect the fluid lines and the pump mounting bolts. Install the new pump by reversing the process: attach it to the mounting bracket, connect the fluid lines, and re-install the belt. Finally, refill the power steering fluid and bleed the system as needed to remove any air.
very carefully
In side the fuel tank
To set the timing on a 1994 GMC Suburban you need to warm up the engine while the car is either in park or neutral. Next, you adjust the distributor until the timing is set to where you want it.
Power Steering pump reservoir.