Turn the radio on. Press SET button. This puts the radio in (Program) mode. Press SEL button, then use the up and down on tune to set the hour, then press SEL and use tune to set the minutes.
To set the clock in a 1991 Dodge Stealth ES, first, turn on the car's ignition. Press and hold the "Clock" button until the display starts flashing. Use the "Hour" and "Minute" buttons to set the correct time, then press the "Clock" button again to save your settings. The clock should now display the updated time.
TimeThere are 2 little buttons on the right that you need your nob to push in that will change the time and the size of your nob.
S
Use the set buttons.
You don't, as there's no such thing as a 1991 Dodge Durango
My 2000 Dodge Durango , my clock does not have the h or the m for setting the clock! any suggestions on how to set the clock????? Turn radio on, press set, press sel, now seek should change time.
You can set the clock, on your 2005 Dodge ram, by holding in the volume button. Turning the tuning knob as the volume button is held in. The time will advance with the tuning knob.
the clock on my 1996 Dodge Intrepid has an H and M on the right top. Use a pen or paperclip after turning the key until the power comes on, but before ignition. H changes hours and M changes minutes.
To set the time on a Daniel Dakota wall clock, locate the adjustment knob or dial on the back of the clock. Turn the knob clockwise or counterclockwise to set the correct time, ensuring you pass the hour and minute hands to avoid any misalignment. Once the time is set, ensure the clock is hung securely and level on the wall for accurate timekeeping. Lastly, if your clock has a battery, check that it is properly installed and functioning.
set it at top dead center the computer does the rest
unscrew the distributor pull it out about half way with the distributor cap off and turn the rotor clock wise to disired position
look in your owners manual.