0
What else can I help you with?
What should you do if your accelerator got stuck at 50mph?
put the vehicle in neutral, pull over and shut off engine. then look to see why the pedal stuck
Why does 97 pathfinder engine reving?
throttle plate stuck, accelerator cable binding, vacuum leak, tps malfunctioning.
Should you drive if your accelerator is stuck?
Stuck closed, you cannot. Stuck open, you are foolish
Why does the accelerator get stuck sometimes when you put it in drive?
A sticking accelerator is usually the result of binding throttle cables or a broken return spring. Make sure that these items are ok as a stuck accelerator can be dangerous.
How do you stop a car with a stuck accelerator?
Turn the ignition off.
You should push hard on the accelerator when your vehicle is stuck?
NO
The first thing to do after you experience a stuck accelerator is?
put the car in neutral
If your accelerator suddenly gets stuck what should you avoid doing?
If your accelerator suddenly gets stuck, avoid panicking or slamming on the brakes, as this can make the situation worse. Instead, try to shift the vehicle into neutral to disengage the engine from the wheels, and steer to a safe area away from traffic. Keep your eyes on the road and use your horn to alert other drivers if necessary. Once stopped, turn off the engine and assess the situation.
If your accelerator pedal gets stuck what should you not do?
You should not reach down and pull the accelerator with your hands. point blank switch to lower gear
What causes a 69 Chevy 350 to start but die when you rev the engine during the first start?
carb problem my guess would be accelerator pump or stuck power valves in carb.
What would cause a 1991 Oldsmobile Delta 88 Royale engine to sometimes race when not pressing the accelerator?
well with any vehicle if the engine is accelerating usually its a linkage problem meaning your linkage is getting stuck somewhere check that first
What if the ignition switch starts the starter and the engine run but unfortunately starter continues running what is the cause of this?
Probably a stuck solenoid.
