To remove the alternator from a 1992 Mercury Topaz, first disconnect the negative battery cable to avoid any electrical shock. Then, remove the serpentine belt by loosening the tensioner pulley. Next, unbolt the alternator from its mount, typically involving two bolts, and disconnect the electrical connections. Finally, carefully remove the alternator from the engine compartment.
Have to take off the head, it's there.
90" topaz mercury is getting hot and shut off and the starts when it cool off.? what is the cause of this and how do i fix it?
Just take the covers off the steering column, switch is there.
if it is a 2.5 v6 than take the passenger front tire off and the alternator is right behind the plastic shroud
My alternator stopped recharging my battery but I can't take the tension off my serpentine belt to put my alternator back on.
unbolt it, take the belt off, take the wires off the alternator and replace with new alternator.
take the belt off the alternator and take out the 3 bolts that hold the alternator to the engine and unplug the wires that plug into it and you have it off.
Hey Joe==Take the serpentine belt off and then take the neg battery cable off then remove the wires from the alternator then take the bolts out and remove the alternator. GoodluckJoe
Check all the fuses, if all are good, check the shut off relay.
To remove the calipers on a 1994 Mercury Topaz, start by safely lifting and securing the vehicle on jack stands. Remove the wheel lug nuts and take off the wheel. Next, locate the caliper bolts—typically there are two—remove them using the appropriate socket or wrench. Once the bolts are removed, slide the caliper off the brake rotor, and be careful to support it to avoid straining the brake line.
passenger side bottom back of the engine. to get at it you need to lift the car, remove the front passenger wheel, and take off the splash guards
How take off alternator on a E300D