I have a 2002 Grand Am SE- after I change the oil:) I have to turn ingition to on, but not all the way, just turn the electricity on in the car. press and release the gas pedal 5 times in a slow motion with a half second delay in between puishes., then turn off the car and turn it back on just like you would be to drive it. :)
How do you turn off the change oil light on a Chevysilverado 2002
what number is the fuse on a 2002 garnd cherokee and where is it located
Turn ignition to ON position. Press brake pedal all the way down for 3-5 seconds. Pump the gas pedal 3 times quickly. Start the car. Oil change light should be off now. Works for 2002 Grand Am.
Turn ignition to ON position. Press brake pedal all the way down for about 3-5 seconds. Then pump gas pedal 3 times quickly. Start the car. Oil change light should go off. Works for 2002 Grand Am.
You can change the light bulb by this method.
change the oil
With the car off, turn the key to the run position. Press the gas pedal to the floor 3 times . The car will chime and the Change Oil light will turn off.
assuming you mean the light bulbs, see the answer to "how do you change turn signal lamps both front and rear on a 96 mercury grand marquis" right here in WikiAnswers.
pictures of how to change front signal bulbs on a 2004 grand prix pontiac
If Its an older Grand Marquis its easy. Find the knob that you pull out to turn on the headlights. Now, just turn it clockwise and the light will turn off!
To reset the change oil light on a 2013 Dodge Grand Caravan, first turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After doing this, the oil change light should turn off. If it doesn't reset, repeat the process to ensure it was done correctly.
turn the key on and push the gas pedal to the floor 3 times in 5 seconds