turn the key on and push the gas pedal to the floor 3 times in 5 seconds
How do you turn off the change oil light on a Chevysilverado 2002
You can change the light bulb by this method.
change the oil
Turn your key to on, but don't turn the engine on. Pump the gas peddle three times slow and steady under 10 seconds that is. And then turn on the car and the light should go out!
the socket should just turn out in the back under the hood.
If you mean the change engine oil light, and if your truck is like mine,then you turn the ignition key to the on position,(don't start truck), and step on the accelerator three times, then turn the key off. The light sould be gone after that.
turn ignition switch to run do not start press gas pedal to floor three times within five seconds change oil light will flash if you did it rght turn off then start engine then you are done
Change the front turn signal light bulb. It's bad.
Turn key on , do not start. Push gas pedal to the floor 3 times turn key off, then start engine.
If you can't access the bulbs take the light assy off and turn the bulbs counterclockwise to remove them
I have a 2002 Grand Am SE- after I change the oil:) I have to turn ingition to on, but not all the way, just turn the electricity on in the car. press and release the gas pedal 5 times in a slow motion with a half second delay in between puishes., then turn off the car and turn it back on just like you would be to drive it. :)
HOW TO TURN OFF THE MAINTENANCE LIGHT ON 2002 HONDA ACCOURD