The icv is located next to the rev cable.
Remove the EGR valve from the Corsa. Wash the EGR valve with carburetor cleaner. Make sure that the valve is clean of gunk and let it dry. Reinstall the valve.
http://forums.bimmerforums.com/forum/showthread.php?t=454501
Yes, if the cambelt on a Corsa Utility fails or cuts, it can lead to bent valves. This is because the engine's pistons may collide with the open valves when the belt breaks, particularly in interference engines where the piston and valve paths occupy the same space. It's essential to replace the cambelt at recommended intervals to prevent such damage.
The idle air control valve on a Vauxhall Vectra B is located on the intake manifold. The valve is placed in front of the air tubing, right behind the engine cylinder head.
The idling control valve on an Opel Corsa Classic is typically located on the throttle body or intake manifold. It helps regulate the engine's idle speed by controlling the airflow when the throttle is closed. To access it, you may need to remove any air intake components or covers that obstruct visibility. Always consult the vehicle's service manual for specific details related to your model.
The idle control valve on an Opel Corsa is typically located on or near the throttle body of the engine. Depending on the model year and engine type, it may be integrated into the throttle body or mounted separately. To access it, you may need to remove the air intake duct and other components for better visibility. Always consult the vehicle's service manual for specific location details and guidance on replacement or inspection.
On The Corsa 1.4 Firing Order 1-3-4-2
2,3,1,4
at the very front of the transmission
i have a 2003 1.4 8 valve engine and the firing order is 1423 i found this order works for a 1.2, 4 valve 1997 corsa aswel ( R reg )
If you are talking about the expansion valve then its located on the evaporator ...............