Yeah, that's it!!!!! Have the engine running while you replace the water pump.... This kind of question is a good example of why children are taught NOT to eat paste.
Do you mean "change THE transmission" or "Change the transmission FLUID"? Big difference there....
Im asking how to change the heater core. I don't have the answer.
Press "SET" and then use the keys on the bottom right of the radio.
If you have a digital display on your skylark, therer is a button on the top right side of the diaplay. The button is used to change from volts, oil press, rpm, and temp, depending on which you want to see.
5 quarts with filter change.
Located in the fuel tank. Most likely will have to remove for access
Just remove pan and change bearings.
I wouldn't give it more than 4 or 5 months, tops.
Have you retrieved a code from the ECM? If so what is the code. Is the speedo working?
Usually 4.5 quarts to 5 quarts
Remove belt and tensioner should just be bolted to engine
Just unplug the connector and unscrew it. They are really cranked on there sometimes though. Righty-tighty , lefty-loosy.