answersLogoWhite

0

No you would have to connect the car to a Computer(OBD1 Or ORD2) depending on the year of the car, and reset the code.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is a p0108 trouble code and what to do to fix?

p0108 is map sensor signal high. Replace map sensor


2005 Nissan exterra map sensor problems?

Replace sensor and clear code.


How do you fix P0108 code 2006 Chrysler 300C?

Check all your wiring for your map sensor, if ok replace the map sensor.


1992 blazer with code 63?

low pressure on you MAP sensor clean it or replace it


How do you replace a map sensor on 2004 intrepid?

how to replace a map sensor on a 2004 dodge intrepid.


How do you replace map sensor on 96 Nissan Maxima 3.0?

can you tell me were the map sensor


How do you fix a P0107 code on a 1998 Jeep Wrangler 4.0?

That is a MAP sensor code, check to see if the sensor is returning at least .5 volts, if not check for 5 volt reference voltage on the connector. If you have voltage going in, and none or less coming back out replace the sensor, if no reference voltage check the connectors, wiggle them and monitor the voltage. If the wiggle test checks out, draw a vacuum on the MAP sensor vacuum port. As you add vacuum the voltage should decrease. With no vacuum, the MAP sensor should read around 4.5 volts. If there is no change in MAP sensor reading on the scan tool, replace MAP sensor.


How to fix OBD code p0106?

OBD code P0106 indicates a problem with the Manifold Absolute Pressure (MAP) sensor or its circuit. To fix this issue, first, check the MAP sensor for any signs of damage or contamination, and ensure all connections are secure. If the sensor appears to be functioning correctly, inspect the vacuum lines for leaks, and check the wiring and connectors for faults. If necessary, replace the MAP sensor or repair any damaged wiring to clear the code.


Fix p0105 on Mercedes e320?

ck for vacuum at map sensor hose, if it is vacuum present replace the map sensor.


How do you replace and locate the map sensor in a 1990 Honda civic?

the map sensor is located on top the intake manifold and reads off map sensor just disconnect wire then get a Philips screw driver and take off then replace and put back on


What does error code p0107 for a dodge intrepid mean?

MAP sensor circuit low.MAP sensor circuit low.


How do you locate and replace the map sensor in a 95 Buick LeSabre?

Don't think yours will have a MAP sensor. It will have a MAF sensor, and it is attached to the air filter housing.