answersLogoWhite

0

There would defiantly be a cylinder misfire, and rough running. Worst case the valve could hit the piston and do serious internal damage.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is the purpose of a valve spring in a petrol engine?

The valve spring is the spring that closes the valve in the engine head after the cam lobe or rocker opens it . If the valve didn't close, many things would happen , the main one being the motor would not fire .


Can you replace valve seals on a dodge 360 ram with out removing the heads?

Yes, you remove the rockers, add air pressure in the cylinder through the plug hole and use a valve spring compressor to remove valve spring. You can now change the valve seal.


What is used to lock a valve spring on a valve?

A valve spring "keeper" or AKA a valve spring "retainer" is used to lock a valve spring to the valve.


How do you fix broke valve spring in ford expedition?

By replacing it with a new set, if one breaks you change all at the same time.


Belt broke on 1997 Dodge Caravan 3.0 are valve bent?

timing belt broke n changed it now bottom crank doesnt turn all way round it s hitting something on a dodge caravan 2000 3.0


What is Valve pocketing?

Valve pocketing is when a valve is hammering the valve seat.mostly due to miss adjusted valve spring/wrong valve spring/to strong of a valve spring or valve stem to short.Makes the valve seat deeper.


How do you replace the bad valve seals on a 2000 Dodge Neon ES oil on one plug?

To replace the bad valve seals on a 2000 Dodge Neon ES, first, you will need to remove the valve cover to access the valve seals. Next, you will need to use a valve spring compressor tool to compress the valve spring and remove the valve spring retainer, spring, and seal. Replace the old valve seal with a new one, ensuring it is properly seated and lubricated before reassembling the valve components. Repeat this process for each valve seal that needs replacement.


The timing belt broke on my 2002 dodge stratus se how do you check to see if it caused damage when it broke?

TAKE A WRENCH AND TURN THE ENGINE VERY SLOWLY. IF IT STOPS TURNING YOU BENT A VALVE.


How many positions does a spring offset valve have?

how many positions does a spring offset valve have


How do you remove valve springs?

you need to compress the spring with a valve spring compressor tool, and then remove the valve keepers, and retainer.


What is the bulk valve on 03 Dodge Ram?

As a Dodge mechanic, I have never heard of a bulk valve.As a Dodge mechanic, I have never heard of a bulk valve.


Where is egr valve located on dodge Dakota 1997?

A 1997 Dodge Dakota does not have an EGR Valve.