To replace the bad valve seals on a 2000 Dodge Neon ES, first, you will need to remove the valve cover to access the valve seals. Next, you will need to use a valve spring compressor tool to compress the valve spring and remove the valve spring retainer, spring, and seal. Replace the old valve seal with a new one, ensuring it is properly seated and lubricated before reassembling the valve components. Repeat this process for each valve seal that needs replacement.
The head, or top part of the motor, must be removed to replace valve seals. After the head is removed take it to a machine shop and they will mill the head to make sure it is flat and also grind down the valves and replace the valve seals.
Remove the wiring harness from your 2000 Dodge Stratus EGR valve. Remove the EGR valve retaining screws. Reverse the process to install the new EGR valve.
the seal on the valve cover needs to be replaced. my 2000 neon had the same problem. I replaced the seals in the valve cover and it fixed the problem. The kit came with the seals for the spark plugs.
On the 2.8 it's on top of the plenum at the back. disconnect the hose & unscrew the pcv valve & replace.
Get a mechanic to do it. You obviously have no idea as to the complexity of the task. e.g valve stem seals, valve seats, warped head tolerances etc.
Attached to the valve cover is a hose on the driver side. Unscrew the nut closest to the valve cover and that is the PCV valve. It is a straight PCV valve, not the elbow shape you may be looking for.
If the light is on, it will need checked and diagnosed.
No.
I need detailed information on how to replace a starter for a 2000 dodge intrepid
Not sure what a Dodge Adventure is, Trucks did not have EGR in 2000, minivans and cars did.
Valve to piston, no. Valve to valve, yes.
There isn't a water control valve.