Attached to the valve cover is a hose on the driver side. Unscrew the nut closest to the valve cover and that is the PCV valve. It is a straight PCV valve, not the elbow shape you may be looking for.
A 2000 Dodge Neon does not have a maf sensor.
If the light is on, it will need checked and diagnosed.
NO
A dodge neon does not have a heater valve. The inside temp is adjusted with an airflow control door inside the dash.
Inside the transmission, on the valve body.
A tire rod on a 2000 Dodge Neon cost approximately 119.00 to replace. 15.00 at Napa
If you are looking for a modulator valve, it does not have one. Dodge does not use them.
Rip the old ones out. Then replace with new ones.
I would say yes, in fact the engine you are removing SHOULD have one since it is a 2000, the wiring harness should already have the connector attached.
no a 2001 dodge neon motor will not work in a 2000 neon
Haynes repair manual, Dodge Neon 2000 thru 2003. Book #30036
To replace the bad valve seals on a 2000 Dodge Neon ES, first, you will need to remove the valve cover to access the valve seals. Next, you will need to use a valve spring compressor tool to compress the valve spring and remove the valve spring retainer, spring, and seal. Replace the old valve seal with a new one, ensuring it is properly seated and lubricated before reassembling the valve components. Repeat this process for each valve seal that needs replacement.