Inner tierod ends on a 96 ford winstar?

Answer 1

loosen lock nut on tie rod, just connect outer tie rod from spindle remove outer tie rod measure from lock nut to end of inner tie rod so on the new one you could put the lock nut back in the same spot, remove rubber boot over inner tie rod, you now need a special tie rod socket to remove inner tie rod or a crow foot and a long extension turn the steering wheel so the shaft on rack and pinion is sticking out so you could work on it remove inner tie rod installer in opposite order don't forget to put the new lock pin on new inner tie rod and alignment done so the toe setting is right if off you could wear you tires out