Yes, a TH350 transmission can be compatible with a Chevy Cheyenne equipped with a 4.3L V6 engine, as the TH350 is a common automatic transmission used in many GM vehicles. However, you will need to ensure that the transmission's bellhousing is compatible with the engine and that the necessary modifications for mounting, linkage, and driveshaft alignment are addressed. Additionally, sourcing the correct torque converter and ensuring the transmission can handle the engine's power output is important for optimal performance.
The Chevy 283 engine has the standard bellhousing configuration and is compatible with transmissions that bolt to first generation small blocks. The automatic TH350 transmission will fit the 283 engine.
Assuming "hold" means compatible, yes
you can get a pointer at many parts suppliers such as jegs or summit. it will be chrome but will still do the job. bolt on to the engine and then set timing.Just a note. A TH350 is a transmission. You can not time a transmission.
You can find an exploded view for a TH350 transmission in transmission service manuals. The transmission service manuals can be obtained from most local libraries.
It's a GM transmission.
Most people with this motor go with a th350, th700r4, or a th200r4. The th350 does not have an overdrive gear, so if your driving on the highway, your gas milage will suffer.
For a TH350 transmission mounted to an engine block, the typical bolt size is 3/8-inch by 16 threads per inch. The length of the bolts can vary depending on the specific application, but they are commonly around 1 to 1.5 inches long. Always check for compatibility with your specific engine and transmission setup to ensure proper fitment.
Not hard at all. :)
Probably a TH350
if you have an electrical plug and its a th350. you have a th350C or lock up. it is to control; the lock up soliniod
About 10 to 12 qts
turbo 350, TH350. but its a BOP TH350 not a chevy, same tranny, different mounting holes