0
Is a fuse burned out if you changed your tail light and its still blinking fast you have a 2006 ford fusion?
If one of your indicators (front or rear) blinks too fast it normally means that the corrosponding bulb is burnt out.
i.e. if the left rear blinks too fast the left front is probably burn out or the terminals on the left front bulb are slightly corroded and not making proper contact.
What else can I help you with?
Why is oil light blinking on Isuzu Rodeo?
The oil light could be blinking in an Isuzu Rodeo because it is time to get the oil changed. This could also occur if the oil is low.
Why is the oil light blinking red on a 1994 Honda Prelude?
You probably need to get your oil changed?
What happened when you changed the tilt angle of the screen and turned on the light?
The light burned and couldnt show
What is the problem if you have a yellow service light with blinking long beam that turns off in a 2001 Pontiac sunfire with no codes reported on diagnostic check?
This is strictly a guess. Is one of your headlight burned out? Some cars will indicate which light is burned out.
Turn signal not blinking for 2004 RX 330?
If your light is solid 1 bulb is burned out or if no lights blink it is a flasher located in your fuse box
Rapid blinking tail light on your 2000 blazer s-10 how do you change it?
The tail light bulb is probably okay, it's the front signal light that is burned out, this would cause the rear light to blink rapid.
What does blinking red light mean?
Blinking red light signifies alertness or danger.
How do you fix a fast blinking signal light on a 96 GMC Suburban?
Turn on that fast blinking signal light and check to see if the front and rear signal lights are both working, chances are you have a burned out bulb. If both front and rear bulbs are flashing fast, replace the flasher relay.
What do you do a blinking red light at an intersection?
Stop. Treat the blinking red light as a stop sign.
98 mountaineer outside brake lights and doorlocks stopped working 3rd brake light works but stays on blinking dimly even when car is off already changed brake switch?
THIS WAS MY QUESTION, BECAUSE THE 3RD BRAKE LIGHT WAS BLINKING I THOUGHT THERE WAS A MAJOR PR0BLEM,TURNS OUT IT WAS THAT BOTH BULBS WERE BAD,CHANGED THEM AND EVERYTHING WAS FINE
What causes signal light to come on solid and not blinking in 98 Chrysler Sebring Convertible?
Check all of you bulbs on the car, more than likely one is burned out...
You had the rear struts of your 98 Lexus es300 changed and now the trac off light is blinking and the abs light is on and its not reading on the diagnostic computer?
Bring to a shop that has an ABS scanner
