No , the brake light should come on when you press the parking brake pedal , but the
ABS light should not come on
You can adjust your parking brake by turning the parking brake adjustment bolt. The parking brake adjustment bolt is located on the parking brake pad assembly.
the eldorado has an automaatics parking break. as soon as you put the transmission in gear the parking break releases.
it may be because there is another problem in the brake system
Put your foot on the brake, pu the car into drive and the parking break should disengage. if not, push on the parking break while holding the break in drive.
There is a lever above the parking break that you pull by hand.
no it wont as long as your parking break is not on . usually the light comes on to indicate that you are running low on break fluid
be more specific the break sensor?parking break light?
I have a manual 96 Mazda Protege, with the parking break located behind the shifter. The adjustment bolt is located right next to the parking break on the left side (drivers side) of the parking break handle. you will have to remove the rubber cover around the parking break shaft in order to see the bolt.
If it's all the way over on the left, it's the parking/emergency brake. You set and release the parking brake with this pedal. If it's right next to the brake, it's a clutch.
Yes! That's basically what the parking break is... a switch that turns it on and off.
There is a sequence you have to follow in the manual. off the top of my head... after you turn your car on, you have to engage the parking break, disengage the parking break, and then re-engage the parking break. read the manual or just google it for the correct instructions to remove the video restriction
check break fluid level