0
What else can I help you with?
How do you get your 1991 camaro louder?
Long tube headers and a good catback exhaust. get magnaflow or a flowmaster
How do you install headers into a 1983 Chevy Camaro?
The old exhaust manifold will need to be removed. The new headers will either have to be made to fit the engine well, or the inner fenders will have to be modified to fit. Then the headers will need to be either mated to the old exhaust or a new exhaust system will need to be installed. In a v8 engine installation most people prefer a dual exhaust to maximize the headers capability.
What can i do to make my 2000 camaro ss faster?
new headers and exhaust can improve it by at least a hundred horse power
How do you get 300hp on a 1985 camaro iroc-z?
Add exhaust headers, get a performance camshaft, or buy an Edelbrock fuel pump
What exhaust is better for a 94 V6 Camaro?
From what I've seen most people are running Pacesetter headers, with either Magnaflow or Borla exhaust/mufflers. Some also use Flowmaster exhaust/ mufflers but from what I've heard the Flowmaster doesn't sound too hot on a v6 Camaro as far as the "Flowmaster" sound.
What is the best way to bump up the HP on an 1980 z28 camaro?
Best is headers, delete the cat, and after market exhaust. After that look into building the motor up
What are the best headers for the 1997 camaro lt1?
Don't buy slip fit headers. If you are going to spend the money, spend it right. Slip fit will give you a big headache, no matter who installs them. They will leak like a sive and drive you crazy. I recommend that you get hooker headers.
What is the best 'bang for your buck' way to get more hp and torque out of the 1988 Chevy Camaro 2.8L V6?
easiest way is to slap on a set of cheap headers and dual exhaust pipes
What parts will improve my horsepower in a 2000 v6 camaro?
there are some good headers and exhaust out there like a flowmaster for the 200o will give a extra 25 horsepower for 400 bucks and headers will give about twice that cold air intake, high flow cat, pulley system, headers, exhaust. also aluminum driveshaft will reduce weight and allow more power to the wheels and better rear gears will help get more power to the ground.
How do you install long tube headders on a 1995 camaro z28?
To install long tube headers on a 1995 Camaro Z28, start by lifting the vehicle and removing the old exhaust manifolds, disconnecting any necessary components like the O2 sensors and exhaust pipes. Next, fit the new headers into place, ensuring proper alignment with the engine and bolt holes. Use new gaskets to seal the connections, tightening the bolts in a crisscross pattern to avoid warping. Finally, reconnect the O2 sensors and exhaust system, and check for leaks before lowering the vehicle.
Do you have to change the headers when doing ls1 swap on 1st egn camaro?
Yes.
Can a big block Chevy fit in a 83 camaro?
Yes. I think that Hooker headers makes a kit with moun ts, headers, and frame reinforcements.
