0
What else can I help you with?
What are some home uses for gaskets?
There are numerous home uses for gaskets. Some common uses for gaskets at home include using them to repair or construct pipes for use in heating or water flow.
How do you repair blown head gaskets?
You cannot repair a blown head gasket, you must remove the heads and replace the gasket.
1995 Buick Regal V6 3.1 engine how do you repair the head gaskets?
well you dont repair the gasket itself you just replace them.
Is it better to repair head gaskets or replace the engine?
if the miles on the engine aren't too high, then just replace the head gaskets. if the whole engine is tired go ahead and swap out the motor. its a lot cheaper to do the gaskets then to buy a new motor.
Should you replace head gaskets during intake gasket repair?
No reason to if the intake gasket is the only problem you have. If engine was running smooth and was not overheated then there is no reason to fool with the HEAD gaskets
Is it possible to repair a burned valve head with chemical additives?
More than likely you will have to remove the head but, you can try injecting a product such as Seafoam or Techron into the engine through a vacuum hose and it may or may not work. Follow the directions to the letter. I have seen it work but I have also seen it fail to help. Worth a try for the $6 it will cost to try.
How do you replace intake manifold gaskets 1997 z34 Monte Carlo?
i suggest you get a repair book.it is not easy
What is the average price to repair a water pump and gaskets in your 98 cavalier with a 2.4 engine?
AnswerThe pump should run anywhere between $20-$30. I'm not sure how much the gaskets are.The gasket set consists of 3 gaskets and runs about $4.
Do you need to drop the engine to replace the head gaskets on a 1992 G20?
No, they can be replaced with the engine in the vehicle, but it is not an easy repair.
Does it fix blowen head gaskets?
does nanotechnology ( head gasket and block repair) fix blowen head gasket
How do you repair head gasket on 89 Chevy silverado?
Short answer, remove the heads and replace the head gaskets. If you want to know exactly how to do this, then purchase an Hayne's or Chilton's repair manual for your car.
How do you change head gaskets on a duramax lly?
The intake & exhaust manifold must be removed. Then the head must must be removed. A very difficult repair and not a repair a novice should attempt.
