0
What else can I help you with?
How do remove rear engine mount on a 1998 Chevrolet's Prizm 1.8 liter.?
To remove the rear engine mount on a 1998 Chevrolet Prizm 1.8 liter, first, ensure the vehicle is securely lifted and supported. Disconnect the battery, then remove any components obstructing access to the engine mount, such as the air intake or exhaust components. Unbolt the rear engine mount from the engine and the chassis using the appropriate socket size. Finally, lift the engine slightly with a hoist or jack to relieve tension on the mount, then remove the mount from its location.
Will an engine out of a 1995 Prizm fit a 1994 Sidekick it says Toyota all over the engine compartment?
No. The Sidekick is manufactured by Suzuki with a totally different engine. The Prizm is manufactured in California along side the Toyota Corolla. The Prizm is a rebadged Corolla.
Did the 1994 Geo Prizm have a Mitsubishi engine?
No, it is a Toyota engine.
Where is the throttle body located on a 2001 Chevy Prizm?
I have a 99 Chevy prizm. The throttle body is located on the driver side of the car in the engine. Following the air filter housing (the black tube) you will it connected to the engine. It will have a clamp on it. You need a screwdriver to loosen the clamp. It might be a bit hard to remove.
Will a 4ag motor out of a 92 geo prizm fit in a 92 geo prizm gsi?
The Geo Prizm GSi alrady has a 4AGE smallport MAP sensor engine. The other model of Prizms have the 4AFE engine, which would be a downgrade in performance.
What is the engine oil capacity for a 2000 geo prizm with 1.6L engine?
4 quarts
Remove cv joint on 1991 geo prizm?
Here is the link to ehow on how to remove the CV joint on a 1991 Prizm. http://www.ehow.com/how_7906772_replace-geo-metro-cv-joints.html
How do you remove the differential on a 95 Geo prizm 3 speed automatic?
remove intire trannie
How do you adjust the rear brakes on a Chevy Prizm?
To adjust the rear brakes on a Chevy Prizm, start by ensuring the vehicle is safely lifted and supported. Remove the rear wheel to access the brake drum. If the Prizm has drum brakes, locate the adjustment wheel or star wheel through the access hole on the backing plate and turn it to expand or contract the brake shoes until they lightly contact the drum. After adjustment, reassemble the wheel and lower the vehicle, then test the brakes for proper function.
How to engine replacement 2000 Chevy Prizm?
To replace the engine in a 2000 Chevy Prizm, first disconnect the battery and remove any components obstructing access, such as the air intake and exhaust manifold. Then, drain the engine fluids and detach the engine from the transmission by removing the bellhousing bolts. Lift the engine out using an engine hoist, and install the new engine by reversing the disassembly steps, ensuring all connections are secure before reconnecting the battery and testing the vehicle. Always refer to a repair manual for specific torque specifications and procedures.
Where is the ignition control module located on a 2000 Chevy Prizm?
The ignition control module on a 2000 Chevy Prizm is typically located on the engine, mounted to the ignition coil assembly. To access it, you may need to remove the engine cover and other components for better visibility. It's advisable to consult the vehicle's service manual for detailed instructions and diagrams specific to your model.
Why does a 1996 geo prizm the engine shakes?
have you checked your motor mounts?
